Best way to start tuning my 10k

This forum provides help with antenna installation, as well as guidance on selecting the right antenna for your radio or mobile setup.
Post Reply
User avatar
Little Reb

Best way to start tuning my 10k

#33879

Post by Little Reb »

Im fianlly putting my 10k on my roof and i got a trimag and a 12 inch shaft 10k what is the best way to get this thing tuned without tearing up my equipment?
User avatar
Mr RadioActive

#33881

Post by Mr RadioActive »

Roof of what?
User avatar
Little Reb

#33887

Post by Little Reb »

Dodge Dakota
User avatar
hotrod459magnolia

#33894

Post by hotrod459magnolia »

I TRIED TUNING MINE AND CUT TO MUCH OFF THE STINGER AND HAD TO BUY ANOTHER ONE. THE BEST THING TO DO IS ADJUST IT UP AND DOWN TILL YOU FIND THAT SPOT.
User avatar
blackjack

#33901

Post by blackjack »

i had to cut almost 2 feet of stinger to get mine right. but cut little by little unitll you get it right. i heard its hard to get the swr right with them on a magmount. go ahead and cut that hole lol. good luck
User avatar
BigBopper

#33902

Post by BigBopper »

He is matched up today,,,but had problems with a piece of equipment,,,he can explain
User avatar
Little Reb

#33904

Post by Little Reb »

Thanks alot bopper for commin up and helpin me tune my antenna. And yes my amp is outta service never even got to hear it go one time. Mudduck i sent you a pm bout the amp hope you respond Thanks everyone
User avatar
EricExtreme

Re: Best way to start tuning my 10k

#33936

Post by EricExtreme »

Little Reb wrote:Im fianlly putting my 10k on my roof and i got a trimag and a 12 inch shaft 10k what is the best way to get this thing tuned without tearing up my equipment?
I have the 22" 10k. I had to cut off a good foot off of the stinger. I did it about 1/4 of an inch at a time. Took me about an hour to get it working at a 1.1.
User avatar
HI-TECH

#33960

Post by HI-TECH »

o yeah ive seen guys spend hours upon hours tuneing there 10k's and ive seen some guys just tos it up there right out of the box and get a flat match.. p10k's are wierd :P
User avatar
Phaze91460

#33989

Post by Phaze91460 »

took me about an hour the first time I set mine. Spent an hour and a half after I grounded everything and it changed the second time.

One thing I liked about the Monkey Made MM-4 I have on the Dodge is that out of the box I could adjust the SWR's flat without cutting anything.
User avatar
BigBopper

#33996

Post by BigBopper »

Lil Rebs 10K is mounted on a tri mag mount,,,most of the ones that I have tuned on the tri-mag,,,I have had to pull up about 1/2" to 3/4" and they tune pretty good across the channels,,his problem was when the amp was turned on,,,no audio,,,kinda like the amp wasn't getting enough power, but 8 ga to the battery,,and its only a 2 pill,,,no idea what is wrong,,,I think the radio keyed 2 watts and was only getting about 50watts out of the amp,,total,,without the amp, his SWP General Lee was nothing but smacking ducks and kicking chickens!! and yes everything is well grounded
User avatar
Rex_foxhound

#33997

Post by Rex_foxhound »

i relly have no idea but i'll throw something out there anyways... could it be a bad jumper?
User avatar
BigBopper

#33999

Post by BigBopper »

New jumper,,,should of tried another one though,,you can get bad jumpers,,,,Thanks
User avatar
Phaze91460

#34000

Post by Phaze91460 »

Wow, Big Bopper, I had to cut 2 and 1/2 feet off my whip to tune.
User avatar
BigBopper

#34003

Post by BigBopper »

Mudduck said to ship the amp back to him,,good service!!
Post Reply