turner+3 help

[viper0179]

I purchased a turner+3 it works great on my Madison but will not work at all on my washington or Zachary t.I have a turner+2 it works on all and wired the turner+3 the same but no change.The turner+3 has red,black,clear,and shield what am I doing wrong or need to do any help greatly appreciated.

[Foliant]

Maybe this will help you out.
(All my other informations are in german)

[Please login or register to view this link]

[MDYoungblood]

Hello viper0179,
I haven't a clue why it works on the Madison and not the other two, they are are 4 pin, (I guess), (858 chip) radios, they are all wired the same. First check the switch on the bottom and make sure it is switched to the rear of the mic, that is the electronic switching setting. If that isn't it check the wiring, pin 1 is shield, 2 is white, 3 is red, 4 is black. Maybe if you were a little more specific on what isn't working, that would help greatly.

3's

Greg

[viper0179]

Hey all thanks for the input found it was the relay switch on bottom it was bad was able to replace luckily I sure like the sound first one I've owned thanks again all

[dirtyjob]

definately a great mic