HAPPY BIRTHDAY MDYOUNGBLOOD!

Courier BTM-4 wiring to Realistic

This forum is a valuable resource for microphone information, including wiring details and more. If you need assistance with choosing a high-quality microphone for your radio, feel free to ask here.
Post Reply
User avatar
Unit243
6 PILL USER
6 PILL USER
Posts: 53
Joined: January 4th, 2014, 9:08 pm
Handle: Red Knight
Real Name: Mark
Antenna: Maco 5/8 wave
Radio: Kenwood TS440SAT
Contact:

Courier BTM-4 wiring to Realistic

#352509

Post by Unit243 »

Can anyone tell me how to wire my Courier BTM-4 desk power mic to my Realistic radio ?? Thanks peeps , 73's
[ external image ]

Kenwood TS-440S , Turner Plus 3 and a Maco 5/8th's wave.... 1137 Southern Ontario Standin' by !!
User avatar
MDYoungblood
Verified
Site Admin
Site Admin
Posts: 10,809
Joined: June 12th, 2010, 8:05 pm
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: Courier BTM-4 wiring to Realistic

#352524

Post by MDYoungblood »

I can but I got 3 questions for you first,
1. Is the original mic plug still on the mic?
2. What Courier radio was the mic wired for?
3. What Realistic radio do you want to wired it to?

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
Unit243
6 PILL USER
6 PILL USER
Posts: 53
Joined: January 4th, 2014, 9:08 pm
Handle: Red Knight
Real Name: Mark
Antenna: Maco 5/8 wave
Radio: Kenwood TS440SAT
Contact:

Re: Courier BTM-4 wiring to Realistic

#352535

Post by Unit243 »

MDYoungblood wrote:I can but I got 3 questions for you first,
1. Is the original mic plug still on the mic?
2. What Courier radio was the mic wired for?
3. What Realistic radio do you want to wired it to?

3's

Greg
It's wired for the Centurion right now but I'm not gonna use the radio till I get more crystals put in it.

I wanna wire it for a Realistic TRC-453 , the stock R/S mic still has the plug on the end and I just want to un solder it and solder it on the end of the BTM-4 , the mic in my pic, Thanks Greg, Mark.
[ external image ]

Kenwood TS-440S , Turner Plus 3 and a Maco 5/8th's wave.... 1137 Southern Ontario Standin' by !!
User avatar
MDYoungblood
Verified
Site Admin
Site Admin
Posts: 10,809
Joined: June 12th, 2010, 8:05 pm
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: Courier BTM-4 wiring to Realistic

#352542

Post by MDYoungblood »

I believe you are in luck, I think that mic can work on a electronic switching radio, if I remember correctly.

The Courier wiring is,
tip-----white---audio
ring----red-----TX
sleeve-ground/shield
nc------black--RX

so the wiring to the TR-453 is,
pin1---ground/shield
pin2---nc
pin3---red
pin4---white
pin5---black

I am hoping that the black wire is connected to the switch in the mic, some were, some weren't, if that is the case you will have to open the mic and make the connection opposite the red wire on the switch. This will have to all be reversed to use the mic on the Courier again.

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
Unit243
6 PILL USER
6 PILL USER
Posts: 53
Joined: January 4th, 2014, 9:08 pm
Handle: Red Knight
Real Name: Mark
Antenna: Maco 5/8 wave
Radio: Kenwood TS440SAT
Contact:

Re: Courier BTM-4 wiring to Realistic

#352560

Post by Unit243 »

MDYoungblood wrote:I believe you are in luck, I think that mic can work on a electronic switching radio, if I remember correctly.

The Courier wiring is,
tip-----white---audio
ring----red-----TX
sleeve-ground/shield
nc------black--RX

so the wiring to the TR-453 is,
pin1---ground/shield
pin2---nc
pin3---red
pin4---white
pin5---black

I am hoping that the black wire is connected to the switch in the mic, some were, some weren't, if that is the case you will have to open the mic and make the connection opposite the red wire on the switch. This will have to all be reversed to use the mic on the Courier again.

3's

Greg

Sorry I dont understand what you mean, sometimes I have to be drawn a picture to understand haha.

Wednesday, 15 January 2014, 19:50 PM

Fixed
[ external image ]

Kenwood TS-440S , Turner Plus 3 and a Maco 5/8th's wave.... 1137 Southern Ontario Standin' by !!
User avatar
MDYoungblood
Verified
Site Admin
Site Admin
Posts: 10,809
Joined: June 12th, 2010, 8:05 pm
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: Courier BTM-4 wiring to Realistic

#352633

Post by MDYoungblood »

I was just starting to explain what I meant when I saw your last posted that said "fixed". Good job at figuring it out.

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
Unit243
6 PILL USER
6 PILL USER
Posts: 53
Joined: January 4th, 2014, 9:08 pm
Handle: Red Knight
Real Name: Mark
Antenna: Maco 5/8 wave
Radio: Kenwood TS440SAT
Contact:

Re: Courier BTM-4 wiring to Realistic

#352964

Post by Unit243 »

MDYoungblood wrote:I was just starting to explain what I meant when I saw your last posted that said "fixed". Good job at figuring it out.

3's

Greg

Thanks Greg , next radio it will be hooked up to is a Cobra 135 ? XLR ssb base station. :cheers:
[ external image ]

Kenwood TS-440S , Turner Plus 3 and a Maco 5/8th's wave.... 1137 Southern Ontario Standin' by !!
Post Reply