Hey there I have the superstar 507-5 mic stripped and ready to go onto a hr2510 yellow white red black and shield,I have tried putting the red on pin 1 and the black on pin 3 it looks like it's transmitting but I'm scared to fry my radio any suggestions?
[mod=Bozo]Topic Split and moved here from [Please login or register to view this link] - Please start your own topic, and not hi-jack someone else's topic....[/mod]
Super Star DM-507-5 Mic Wiring - Scared to Fry my radio
-
wg183
- NEW DUCK
- Posts: 1
- Joined: November 14th, 2018, 5:45 am
- Real Name: Andrew
- Contact:
-
MDYoungblood
Verified - Site Admin
- Posts: 10,809
- Joined: June 12th, 2010, 8:05 pm
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Super Star DM-507-5 Mic Wiring - Scared to Fry my radio
Hello wg183,
Welcome to the forum. As I said on the other post, different manufacturers use different wire colors on their microphones. The correct wiring on a HR 2510 is
pin 1 is audio positive
pin 2 is audio ground and switching ground on mic's that have this option
pin 3 is transmit
pin 4 and 5 are not connected
Now if the microphones packaging has a wiring diagram on it you are all set
3's
Greg
Welcome to the forum. As I said on the other post, different manufacturers use different wire colors on their microphones. The correct wiring on a HR 2510 is
pin 1 is audio positive
pin 2 is audio ground and switching ground on mic's that have this option
pin 3 is transmit
pin 4 and 5 are not connected
Now if the microphones packaging has a wiring diagram on it you are all set
3's
Greg
