New mic issue

This forum is a valuable resource for microphone information, including wiring details and more. If you need assistance with choosing a high-quality microphone for your radio, feel free to ask here.
Post Reply
User avatar
Flywelder
4 PILL USER
4 PILL USER
Posts: 21
Joined: December 29th, 2018, 9:24 am
Handle: Flywelder
Real Name: David
Antenna: mobile units for now.
Radio: Just CB and walkie talkies
Contact:

New mic issue

#393608

Post by Flywelder »

I bought a new mic for my radio. But now, each time I RELEASE the key on the mic, I hear from my radio speaker, a loud ear hurting noise. How would I describe this noise? I'll try by saying it is: a squeal; a loud click; a loud static noise sound with a pop. The sound hurts the ears. Did not hear this when the original mic was still working. Can any one tell me why I am now hearing this? and, how can I, correct it.
The new mic is a brand new, 4 pin cobra. My radio is, a president, Honest Abe.
Thank you to all.
User avatar
jon6667
Skipshooter
Skipshooter
Posts: 345
Joined: May 11th, 2016, 8:17 am
Real Name: jon
Antenna: dipole
Radio: icom 7300
Contact:

Re: New mic issue

#393614

Post by jon6667 »

is it a power mike if it is turn it down.
User avatar
jon6667
Skipshooter
Skipshooter
Posts: 345
Joined: May 11th, 2016, 8:17 am
Real Name: jon
Antenna: dipole
Radio: icom 7300
Contact:

Re: New mic issue

#393615

Post by jon6667 »

possibly the mike is not wired right.
User avatar
Flywelder
4 PILL USER
4 PILL USER
Posts: 21
Joined: December 29th, 2018, 9:24 am
Handle: Flywelder
Real Name: David
Antenna: mobile units for now.
Radio: Just CB and walkie talkies
Contact:

Re: New mic issue

#393660

Post by Flywelder »

Thank you for the suggestions. No it is not a power mike, just a cheep cobra mic.
I tried your suggestions. In the end, I replaced it with another one, of which I was told, is of better quality than the cobra. So far with this new, non- cobra mic, I have no issues at all.
User avatar
MDYoungblood
Verified
Site Admin
Site Admin
Posts: 10,809
Joined: June 12th, 2010, 8:05 pm
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: New mic issue

#393679

Post by MDYoungblood »

The problem is there was is a misalignment of the contacts in the PTT switch, the mic and TX contact is staying connected at the same time the RX makes contact. That can be blamed on a cheap switch, it happens. Only 2 things to do, rewire the mic contacts on the switch itself or find another microphone.

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
jon6667
Skipshooter
Skipshooter
Posts: 345
Joined: May 11th, 2016, 8:17 am
Real Name: jon
Antenna: dipole
Radio: icom 7300
Contact:

Re: New mic issue

#393694

Post by jon6667 »

ok glad you got it fixed
Post Reply