So I managed to get this mic working. I accidentally reversed the cables when hooking up the SWR meter. Keyed the mic, pegged the needle and stopped.
I put the cables on the correct terminals, keyed the mic. Throws a solid carrier, lit up all 5 bars but have no modulation when speaking. I replaced the mic on the TRC-492 Navaho and it worked fine. Any ideas on what I fried?
No modulation on Realistic Amplified mic 21-1173
-
Critter98
- 2 PILL USER
- Posts: 11
- Joined: Feb 15 2024, 05:14
- Handle: 21 EW
- Real Name: Dennis
- Radio: Realistic TRC-492 Navaho, TRC-453, Uniden PC68LTD, Uniden President Grant, 23ch Hi-Range 1 Hi-Gain
- Contact:
-
MDYoungblood
- Site Admin
- Posts: 10,803
- Joined: Jun 12 2010, 20:05
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: No modulation on Realistic Amplified mic 21-1173
Check the wiring again to see if the shield and audio leads are reversed, other than that the AM regulator again went bad.
3's
Greg
3's
Greg
