Av8r1 wrote:Pinned over to max.
Ok sorry i was just un sure.
Well good luck on figureing out the problem.
You should let us know the verdict if you ever find out
TomB
Av8r1 wrote:Pinned over to max.
If the swr meter is like he said, "Pegging the needle", you can trim or raise the antenna all you want, it's not going to help, because there is a loss of ground somewhere. Even if the antenna was 2 feet too long, you wouldn't see swr over 4.0 ( more like somewhere around 2.5...maybe)fireball894 wrote:Well, going back to the fact that the swr was lower on channel 40 than channel 1, I'd say you just need to start trimming the bottom of the whip. Obviously, the antenna is resonant at a higher frequency. This really should have been done before the coax was changed. It's common to have to trim the stinger to bring the bandwith of the antenna down to 11M.
Been there, done this, and it's normal.