How to turn off the Roger beep, Northpoint NT-9 HP,please.

[cavemanmoron]

How can the roger beep be turned off, on the NT-9 HP;

Please.

Thanks,
Newbie to this website.

Not new to CB.

email is cavemanmoron [at] yahoo.com

[cavemanmoron]

In cbtricks@yahoogroups.com, "The Sparrow" <whiteclouds@...>
wrote:
>
> That sounds like an early run Northpoint. The J-9 should be in the
right front corner of the board when the radio is lying on the table
with the front of the radio facing you and the component side of the
board is up and facing you. You could just snip it and install an
on/off switch for it.
>

Thanks for the info!
A black jumper wire,
was covering the J9 uncoated wire jumper.

I snipped it, and bent the one side over slightly,
so it will not touch anything.

The annoying Beep is off now.

Thanks Very much.

Happy New Year.