HAPPY BIRTHDAY MDYOUNGBLOOD!

MAGNUM 257

Whether you're new to using single sideband (SSB) or have years of experience, this forum is the perfect place to ask your questions or provide assistance to those who are new.
Post Reply
User avatar
doctor

MAGNUM 257

#53854

Post by doctor »

Great priced radio, any comments on ssb..drift???, or stable on ssb and how is the receive, thinking about one over an rci/ranger

doctor :shock:
User avatar
Midlander
Skipshooter
Skipshooter
Posts: 467
Joined: December 9th, 2006, 11:07 pm

#53901

Post by Midlander »

Doctor,

You can check out my post using the link below. Seems people are Recommending the RCI2950 or 70 models over this radio...

Here is the link --> [Please login or register to view this link]
User avatar
BigBopper

#53902

Post by BigBopper »

they aren't a bad radio if aligned when new, but most radios need aligned anyway when new, don't drift on SSB, and new ones have a blue display

Specs:

Microprocessor Controlled Transceiver
· 35-40 Watts RF Output Power
· Variable Power - In All Modes
· AM / USB / LSB / FM
· 1 kHz / 10 kHz / 100 kHz Steps
· 5 Digit Frequency Display
· ECM Microphone with Up and Down Frequency Controls
· 5 Memory Channels - Saves Both Frequency and Mode
· Back Lit LCD Display and Front Panel Controls
· Digital S/RF Meter on LCD
· RF Gain and Microphone Gain Controls
· +/- 1 kHz Clarifier
· Noise Blanker and Automatic Noise Limiter
· Frequency Scan
· Last Channel Recall - Returns to Last Operated Frequency and Mode
· Split Frequency Offset for Repeater Use
· Receive Audio Tone Control
· MARS / CAP Compatible (Permits Required)
· 1 Year Warranty
[Please login or register to view this link]
User avatar
doctor

ssb

#54075

Post by doctor »

Yep after reading comments etc., the magnum is a good radio but I believe for your money the rci is the better of the radio for ssb.
I also use a uniden hr2600 with a chip switch in for ssb and its a talker and the receive is hot a great radio.
Tnx a lot guys cu on the airwaves

73
doctor :shock:
Post Reply