who runs what

[Warped One]

i was running a cobra 29 that has been tuned by a local guy with the wilson 5000. the 29 had the mosfets in it and was pushing 36 i believe.but i just got the General HP40w in and i run it witht he wilson 5000

[8fiveO]

Messenger 500 expanded to a 1x8 by **Censored**.

[causmik]

X Force 4X2879 Base Amp

[p38]

Deltaforce pushing the fat boy 1100 watts! Through a 102 whip!

[FB2069]

Regency CR123-B, Xtal socket on the top to multiply 1-4 to where I want to go. D104M6C and an inverted V 1/2 wave wire in the attic. 12w ssb

[DeltaMike15]

RM Italy KL 203P

[DevilDog66]

RM Italy 203P

[KP68]

I build all of my own amplifiers. Most are collecting dust right now but for the moment I run one of my 4 pills into my 16 pill. When my Mr Coily comes in, Ill swap out my 16 pill with my 3CX3000A7, which I did not build. I am going to build a different AB biased driver for the 3000 but not sure yet on which pill configuration I want to go with.

[MDYoungblood]

Since this topic was started in 05 there have been some good builders come and go, I ran an 1X8 made by a local builder for years but now all I have is a nice little RM 351/P.

3's

Greg

[Lakotawalker]

T S 400v baby all the way jacked up on the tennessee juice

[rosman6119]

In the work truck I run a XFORCE 4 pill with a Stryker 655 and right now in my mobile I am running a 575 peak watt Galaxy 98vhp with a custom amp section built in with 4 -2879 non red dot TOSHIBAS built by Nate jones from hoppers radio service , it's an audio monster.

[Rusty Towers]

I run a FB 2x4 driving an Eimac YU-209 steel tube.

[PNK PANTHER]

Cobra 2000 GTL with a D104. D&A Maverick 2 stage 250 watt footwarmer and a Antron -99 at about 35 feet.

[295 antenna]

texas star

[56jmk71]

Radio: Modified President Grant 2, output 10W AM/FM, about 20watts SSB, also several old AM/FM radios.

Mike: CR577 power mike

Power supply: K-PO KP10

ATU: Ten-Tec 254, I use it just for balanced feedline

Antennas: Venom 1/2 wave GP, feed point 22ft above ground, feedline RG-213
Wire antenna EDZ between the trees, fed through 300 ohm balanced line and ATU, height 33feet.
Wire antenna 1/2 wave dipole, fed through RG-58, height about 29 feet. Beaming North America.

-- Tuesday, 15 November 2016, 9:28 AM --

OH... this was an amp thread...

OK, I have also a CB-MAster CB-200, but I don't use it at the moment.
I replaced a burned EL519 with more common PL519 beam tube, and haven't made the housing for the extra filament transformer yet.

-- Wednesday, 16 November 2016, 0:14 AM --

Now the tube glows again

´So, I run CB-MAster CB-200 !

[Mtn Lynx]

Had a Rm Italy KL 203, just replaced it with a Palomar 225 today.

[295 antenna]

since my last post ive gotten a RM 501K with an Optima MK3 behind it .

[Mtn Lynx]

since my last post ive gotten a RM 501K with an Optima MK3 behind it .

Might be able to hear you next time skip rolls in from Cali...

-- Wednesday, 14 December 2016, 22:56 PM --

Update: just got a Palomar 300 yesterday. 225 is still in working order. Might slap that 300 in my truck in summer.

[magikarp727]

Maverick 250 for my base station. In my mobile I run one of my Wawassee JB75A's. Wonder if the JB75A's could be hooked together somehow to increase wattage?

[ Post made via Android ] [ external image ]

[Bombero]

Hey...

I never use an amp on 11M.

On 10,12,15,17 and 20M I rarely use my Tokyo Hy-Power HL-1.2Kfx with my Icom 756 Pro III, and with my Kenwood TS-570D I use a Elecraft KPA500.

As I stated...I rarely use either amp unless there is one heck of a pileup and I need that contact for my logs.

Bombero

[jon6667]

never had the need to use a amp. my radio gets the job done.

[Skyraker426]

I run a Texas Star V400 in the mobile and on the base a Fatboy 1x6... I live in the sticks and without a lil' help, I'd be talking to myself!
Trust me, I need more intelligent conversation!
Wavin' form Georgia!

[Turk182]

Cushcraft 3-element horizontal 8db gain beam on a well grounded 50' tower, LM-400 coax, MFJ 949E tuner, Galaxy DX 959, RM KL-505V, MFJ 6" Giant True Peak Reading SWR/Wattmeter. Not a big dog, but the bark gets out there with conditions.

[Thunderbird641GA]

I just have a base at home right now, and was using a Palomar HD 250-FET until last week when I purchased a Boomer Deluxe 400. I use a MegaWatt S-400-12 power supply with which ever one I have hooked up. I am going to get a bigger power supply soon though, probably an S-700-12.

[Gunner357]

Magna Force 350