Astatic 575M6 to a HR 2510
- PaBluetick+
- 4 PILL USER
- Posts: 22
- Joined: July 15th, 2011, 6:33 am
- Handle: Wayne
- Real Name: Wayne
- Radio: Kenwood
- Contact:
Astatic 575M6 to a HR 2510
looked at it, so tell me if I'm right..... I really like this mic it is a great performer.. Big mistake when they stopped making it. I think it will make the 2510 sound great..
pin 1 white... audio
pin 2 shield... ground
pin 3 red xmit switch
pin 4 no connection
pin 5 no connection
pin 1 white... audio
pin 2 shield... ground
pin 3 red xmit switch
pin 4 no connection
pin 5 no connection
- weatherman
- 6 PILL USER
- Posts: 63
- Joined: March 25th, 2009, 4:28 pm
- Real Name: Chuck
- Antenna: Tarheal/Pred 10K
- Radio: Icom 706MKIIG/HR2510
- Contact:
Re: Astatic 575M6 to a HR 2510
The best mic for that radio in my opinion. Had one many years ago that I ran on a 2510/Lincoln/2600 and wish I still had that mic(and the radio's for that matter). Back to having
the 2510 and the Lincoln but the mic is a little harder to come by.
the 2510 and the Lincoln but the mic is a little harder to come by.
- PaBluetick+
- 4 PILL USER
- Posts: 22
- Joined: July 15th, 2011, 6:33 am
- Handle: Wayne
- Real Name: Wayne
- Radio: Kenwood
- Contact:
Re: Astatic 575M6 to a HR 2510
is the wiring I posted correct ??? I beleive it is... as far as the 575 m6 I see guys getting over 100 bucks for em used.. I have it on a President Grant and it is great... The Grant is going into retirement and the 2510 into 10 meter action... 11 meters will not see much use but is there if need be.. the Grant has very little use on it, that thing has a hot receiver !!
- PaBluetick+
- 4 PILL USER
- Posts: 22
- Joined: July 15th, 2011, 6:33 am
- Handle: Wayne
- Real Name: Wayne
- Radio: Kenwood
- Contact:
Re: Astatic 575M6 to a HR 2510
I looked again, is pin 3 red or black wire ???? somebody gotta know... I'm thinking black now not red.....
- Night Crawler
- Wordwide & Qualified
- Posts: 3,836
- Joined: May 15th, 2007, 9:03 am
- Contact:
Re: Astatic 575M6 to a HR 2510
1. WhitePaBluetick+ wrote:I looked again, is pin 3 red or black wire ????
2. Shield and Blue
3. Red
4. N/C
5. N/C
- PaBluetick+
- 4 PILL USER
- Posts: 22
- Joined: July 15th, 2011, 6:33 am
- Handle: Wayne
- Real Name: Wayne
- Radio: Kenwood
- Contact:
Re: Astatic 575M6 to a HR 2510
tnx for settin me straight..........
- PaBluetick+
- 4 PILL USER
- Posts: 22
- Joined: July 15th, 2011, 6:33 am
- Handle: Wayne
- Real Name: Wayne
- Radio: Kenwood
- Contact:
Re: Astatic 575M6 to a HR 2510
OK ,it is on the radio and sounds great according to those I have worked with it.. Very well pleased with the 2510,mic and whip... Love it when 10 meters opens !!!!!!
Re: Astatic 575M6 to a HR 2510
I have had my President HR 2510 for many years with no problem done up with the chip-switch . I have been thinking of a microphone and saw this post . I am going for my Ham license also and dedicate my radio to just 10 meter as I have other radios for CB . Thanks for the info . I will keep an eye for the mike .
- PaBluetick+
- 4 PILL USER
- Posts: 22
- Joined: July 15th, 2011, 6:33 am
- Handle: Wayne
- Real Name: Wayne
- Radio: Kenwood
- Contact:
Re: Astatic 575M6 to a HR 2510
If you can find one of these mics grab it, they are stellar proformers.......
- shaggy7705
- Duckplucker
- Posts: 174
- Joined: November 8th, 2012, 11:14 am
- Antenna: 102" SS WHIP
- Radio: SuperStar 3900GHP
Re: Astatic 575M6 to a HR 2510
Yes they are, i have one in my mobile and it screamsPaBluetick+ wrote:If you can find one of these mics grab it, they are stellar proformers.......
Shaggy(705)Said that.
73's
Base
Galaxy DX 2517
Golden Eagle D104
2x Pyramid 52psk
Commstar 2xSD1446
Antron 99
Mobile
Superstar 3900GHP/Galaxy Pluto Hybrid
Midnight Special 500 4x2SC2879
102" SS Whip
Astatic 575M6
73's
Base
Galaxy DX 2517
Golden Eagle D104
2x Pyramid 52psk
Commstar 2xSD1446
Antron 99
Mobile
Superstar 3900GHP/Galaxy Pluto Hybrid
Midnight Special 500 4x2SC2879
102" SS Whip
Astatic 575M6
Re: Astatic 575M6 to a HR 2510
Is there another microphone that works well with the hr2510? I have been looking at a Wilson noise canceling power mike at Redman;s
- Eskimo_Pie
- Skipshooter
- Posts: 325
- Joined: February 18th, 2010, 9:18 am
- Handle: SCUBA Diver
- Real Name: Greg
- Radio: Grant XL/HR2510
- Contact:
Re: Astatic 575M6 to a HR 2510
My 575M6B is dedicated to the home base shack, no more mobile action for that baby. If I win the lottery I wouldn't hesitate to buy another 575 from evil-pay (fleapay). They're worth it. I saw one at a ham fest for $15!!!!! I'm kicking myself for not grabbing it. I always run a lithium 9v in the 575, lasts for ever and no chance of leaking, $9.00 per battery worth it. I'm even nervous running Duracells in my other mics, I've had one leak on me.......
9-7-1 Coastal Maine Mobile usually hanging out on 38 LSB
At the home QTH, Uniden Madison/Realistic TRC 457
In the mobile, HR2510/Grant XL
At the home QTH, Uniden Madison/Realistic TRC 457
In the mobile, HR2510/Grant XL
- wild willy
- Donor
- Posts: 142
- Joined: August 10th, 2013, 9:32 pm
- Real Name: Bill
- Antenna: SS Whip, Dipole
- Radio: Many Different
- Contact:
Re: Astatic 575M6 to a HR 2510
HR2510, Astatic 575 + a Killer Bee High Drive DX250 HDV on a Wilson 1000 was an awesome set-up I ran 20 years ago.( I still have them) I will NEVER get rid of that radio, amp or microphone!