Royce 641 Mic Wiring Question

[jdlimages]

I bought an old Royce 1-641 Base station at a garage sale with a cut mic cord. Can anyone tell me which color wires go to which of the 4 numbered solder points on the replacement plug?

Thanks.

[MDYoungblood]

Hello jdlimages,
Welcome to the forum. I can give you the pin out but I don't know the stock mic wiring colors.
1 - Audio
2 - shield or ground
3 - TX
4 - n/c
The shield or ground is usually bare and the wire running inside it is the audio, that leaves the last wire as TX.
How about posting a small intro in the "Welcome to the Forum" topic, [Please login or register to view this link] , so everyone can say "Hi".
3's

Greg

---

Thu Oct 03, 2013 2:29 pm

Another thing you could do is open the radio and change the plug wiring inside, switch pins 1 and 2 and then any Cobra, Uniden, Galaxy mic will work on it.

3's

Greg

[Buzzweiser]

I had one of those a long long time ago. Great talking radio. A D-104 wired up as:

1 White
2 Blue and Shield
3 Black
4 red

[jdlimages]

Thanks for the advice. I'll try these suggestions.