MODBREAK_HEADMDY
removed **Non Sponsor** reference
Cobra 200
-
238
- 2 PILL USER
- Posts: 19
- Joined: Jun 25 2009, 15:59
- Handle: 238
- Real Name: jim brown
- Radio: Sonar2340/ Browning
- Contact:
Cobra 200
It receives on the A band / low channels but will not key. The radio transmits on the other bands & receives on them. Went to CB Tricks & it shows how to convert the chs. You remove R138 for cb chs & put it at R619 for low chs. On one site it said to solder the pads together. Just wanted more info before i open it up. Opened the radio up the R138 had been removed. I was hopeng they had taped the R138 inside but no luck on that. I have no resistors that look like that. It is a 1K. There was a lot of info on **Non Sponsor**, but the latest was 2008. Some said just solder the 2 pads together, but not doing anything till i find out for sure. Thanks 238
-
MDYoungblood
Verified - Site Admin
- Posts: 10,798
- Joined: Jun 12 2010, 20:05
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Try searching through some of these old posts on this radio, you might find the info your looking for; search.php?keywords=Cobra+200GTL
3's
Greg
3's
Greg
