NEED Tram D201A channel selector

[adamf]

Hi all, I have a Tram D201A that needed a little work on the channel selector, it worked about 90% but I decided to take it apart and clean it HOWEVER I made a mistake and reassembled improperly and damaged one of the little metal fingers on one of the blocks and needless to say the channel selector does not work properly now so I need either another channel selector or one of the BLACK blocks with the metal fingers that is not bent on any of them. I know it's a long shot but I'll ask anyway. Thanks for any help. Adam

[wookie]

i don't know how technical you are but basically you could use any 40 selector and use an EPROM to convert the codes to the 201a it is a time consuming and tedious job but it can be done.

[adamf]

Thanks, too much for me to handle but appreciate the post

[wookie]

OK your welcome jut a thought as i have done this before.