Uniden 980 8 volt transmit
-
HOP-A-LONG
- 4 PILL USER
- Posts: 39
- Joined: Dec 22 2007, 23:10
- Handle: HOPALONG
- Real Name: Shannon Royer
- Radio: 11 METER
- Contact:
Uniden 980 8 volt transmit
Hello everyone, could anyone point me to the best spot to grab 8 volt transmit for a RFX 95 install on this radio.
-
MDYoungblood
Verified - Site Admin
- Posts: 10,798
- Joined: Jun 12 2010, 20:05
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Hello HOP-A-LONG, welcome back.
It's really hard to say exactly because I have never had or worked on one but if you check spots on the board marked "TPxxx" you should find one with voltage needed at transmit. Uniden has kept that radio under wraps, I can't even find a schematic that is usable online or a service manual.
3's
Greg
It's really hard to say exactly because I have never had or worked on one but if you check spots on the board marked "TPxxx" you should find one with voltage needed at transmit. Uniden has kept that radio under wraps, I can't even find a schematic that is usable online or a service manual.
3's
Greg
